Order inspection · Suqian, China
17 mm Melamine Slatwall Panels: Pre-Shipment Inspection
White and brown melamine panels, machined T-slots and matching aluminium channels. A closer look at the order inspected on 20 October 2026.
The order
Two finishes. One slatwall system.
The order combined melamine faced slotted MDF boards with aluminium channels for the machined slots.
- Nominal board size
- 8′ × 4′ × 17 mm
- White panels
- 750 boards
- Brown panels
- 230 boards
- Aluminium channels
- 6,000 pieces
Inspection report
What was checked on 20 October.
Pre-shipment inspection by HQC Inspection / China Inspection Service, in Suqian, Jiangsu. The report records Pass; final approval remains with the buyer.
Quantity and workmanship
The report lists 980 panels and 6,000 channels. The 200 inspected pieces comprise 8 white panels, 22 brown panels and 170 aluminium channels.
The workmanship table records zero critical, major or minor defects in the inspected pieces. It uses ANSI/ASQ Z1.4, normal single sampling, General Level II, with AQL 0 / 2.5 / 4.0.
Order status at inspection
The 980 panels had not yet been packed. The 6,000 aluminium channels were presented packed. Packaging and container loading follow as separate order stages.
No approved reference sample was available for comparison. The report marks style, material and colour under its remarks.
Request the inspection report with your panel and fitting requirements.
Request the inspection reportMeasurements
Thickness and weight, shown in the check.
The photographs show a 17.09 mm thickness reading and a white-panel weight of 28.2 kg. These are readings from the inspected panels; your quotation confirms the dimensions and tolerances for your order.
Panel and channel fit
See the channel seated in each finish.
The assembly check covered eight pieces at inspection level S-2 and was recorded as Pass. The photographs show the aluminium channel fitted into the machined slots. This fitting check does not establish a fixture load rating.
