Match the profile
Send a dimensioned cross-section or existing profile sample. Mark steps, radii, visible faces and mating details, with the required finished tolerances.
MDF Mouldings Manufacturer · Shuyang, China
MDF mouldings for a coordinated interior.
Bring walls, doors and room details together with MDF mouldings from our Shuyang factory. We manufacture skirting, baseboards, casings and decorative trim to the agreed profile, length and supplied finish for your interior project.
- Profile specification
- Skirting · casings · decorative trim
- Made to your schedule
- Section · length · finish
Technical specification
MDF Mouldings Specifications
MDF Mouldings are machined trim for skirting, baseboards, door casings and decorative panel details. The cross-section, supplied lengths and raw, sanded or primed condition define each profile.
Section thicknessMaximum section thickness follows the chosen moulding cross-section. Profile steps, curves and remaining material are dimensioned on the drawing, with finished tolerances agreed for the supplied surface condition.
Profile dimensions and lengthsFace width or height, supplied lengths, piece counts and any end preparation follow the MDF moulding drawing and length schedule. Dimensions, units, revision and measurement points are recorded for each profile.
DensityThe quotation identifies the selected MDF core and its nominal density for the moulding profile and use. Component weight depends on the actual cross-section, supplied length and finish.
MDF resin and supplied coatingThe MDF resin system follows the selected core grade. Any supplied primer or coating is identified in the order specification, with the relevant preparation and finish requirements.
Formaldehyde gradeState the emission class, test method and destination requirement for the selected MDF and supplied trim. The quotation identifies the actual product construction and corresponding available reports.
SurfaceRaw machined, sanded or primed MDF mouldings, as specified in the quotation. Visible faces, shaped edges, cut ends, coating reference and finished-surface checks follow the representative sample.
Core, finish and intended useDecorative MDF mouldings for protected interiors. Core, profile, coating, humidity, joints and fixings follow the installation specification. Moisture and fire requirements use the actual product and applicable test method.
Finish and processing
Profile drawings, supplied lengths and paint preparation
Schedule lengths and pieces
List profile IDs, supplied lengths, quantities and end preparation. Keep factory cuts separate from site-fitting allowances and corner-joint requirements.
Choose the supplied finish
Agree raw, sanded or primed supply and the intended topcoat. Prepare shaped edges, cut ends and site joints, and select the core for the room’s humidity.
Applications
Applications of MDF Mouldings
MDF for Interior Wall Panels
Order flat, veneered or grooved wall panels with the openings, trims and finish your interior needs. Our Shuyang factory supplies boards and machined modules to your elevation, keeping panel positions, adjoining finishes and installation packs coordinated.
Explore applicationMDF for Hotel Furniture
Order MDF boards, decorative panels and machined parts for hotel headboards, wardrobes, desks and bedside units. Coordinate finishes, component quantities and labelled packs by room, floor or delivery phase.
Explore applicationBoards and components
MDF Mouldings photos and documents
Product documents for your order
Request the selected core and emissions documents, profile drawing, supplied finish specification and dimensional checks. Special moisture or fire requirements need product-specific information.
Made in Shuyang, China
From our factory to your workshop
Work with Shuyang Cuzi MDF Co., Limited on board selection, machining, inspection and export packing. Our factory has a total daily production capacity of 500 m³ across its operations.
Delivery, returns and warranty
- Delivery lead time
- 3–10 days
- Shipment
- By sea in containers
- Delivery terms
- FOB Qingdao / FOB Lianyungang, China
- Warranty
- 180 days
Made to order. Quantities and mixed specifications are confirmed in your quotation. Delivery lead time starts after specifications and terms are confirmed; sea transit is scheduled separately.
Freight is calculated for your ports and cargo quantity. Returns and exchanges, including timing and costs, are agreed in the order.
Delivery and freight terms · Returns and 180-day warranty · Packing and loading information
FOB China price
US$1.2–3.5 per m
- Availability
- Available to order
Your quotation confirms the specification, quantity, packaging and final price.
Buyer FAQ
Your MDF Mouldings questions, answered.
Are MDF skirting and MDF baseboards the same product?
Both describe trim at the wall-floor junction; skirting is common UK terminology and baseboard is common US terminology. Moulding and molding are also regional spellings. Use the actual section drawing, dimensions, lengths and supplied finish to identify the product for your order.
Can you match an existing moulding?
Share a physical sample or a dimensioned cross-section, plus photographs of the visible profile and its adjoining parts. Identify the section dimensions, curves, finish and acceptable variation. We review a representative machined sample against the agreed drawing before repeating that profile.
Can I order raw, sanded or primed MDF mouldings?
Choose the supplied surface condition with the profile and quantity. The quotation states whether the trim is raw machined, sanded or primed, and identifies any included coating. Review the actual sample with the topcoat and installation finish your team intends to use.
How should MDF mouldings be prepared for painting?
Use the selected primer and coating instructions to agree sanding, sealing and coating preparation. Include shaped edges, cut ends, joints and fixing holes in the finishing plan. A representative finished sample checks appearance, adhesion and touch with the supplied surface condition.
How are joints and fixings planned?
Choose joints, fixing positions and installation adhesive around the profile, supporting surface and site conditions. Check available fixing space and edge distances on the cross-section. Try adjoining trims and a representative corner or length joint with the planned filling and coating system.
Can I use the mouldings in humid interiors?
Describe the room's humidity, cleaning and likely exposure. Select the appropriate MDF core grade, coating, protected ends and joints, and installation clearance for that use. Keep the service conditions with the product specification so the supplied trim and installation details are reviewed together.
How are long mouldings stored and packed?
Keep mouldings dry, flat and evenly supported along their length. Use clean separators, profile and end protection and controlled strap positions. Bundles are identified by profile, supplied length and quantity, with packing groups agreed for your receiving or installation sequence.
How do I request a profile sample?
Send the section drawing or sample reference, dimensions, supplied finish and the details you want to assess, with your delivery address. Samples are free; you pay the courier charge, which can be credited against a formal order. We confirm availability, any custom machining or coating preparation and dispatch timing.
Buyer guides
Practical guides for your MDF order.
Cut-to-Size MDF: Cut Lists, Grain Direction & Packing
A cut list is most useful when each rectangular MDF part has a clear finished size, quantity and orientation. Add the face, edge treatment and label that your assembly team needs, then agree the dimensional basis.
Read guideCNC MDF Routing: Drawings, Depths & Hole Positions
A clear CNC drawing helps your MDF parts arrive with the profiles, holes and orientation your assembly expects. Bring the material specification, file revision, datums and tolerances into one component definition.
Read guideMDF Edge Preparation for Painting: Sealing and Finish Guide
The painted edge often makes the difference between a convincing MDF component and a finish that needs rework. Start with clean machining, then prepare straight edges, inside corners and profiles for the chosen coating system.
Read guideLet's shape the details of your next interior.
Send the profile drawing or sample, section dimensions, lengths, quantities, supplied finish and destination. We reply within 12 hours to review the order, arrange a free sample and prepare your written quotation.